Additional charge for:

• Speed optimizer for Z-axis drive (Maximum axis speed: 120 mm/s)
• Rotation center adjustment, drive controlled via frequency inverter

POS 3000 Options

• Radius step bending function
• PC version (external programming), 1st license
• Remote maintenance (Connection via RJ45 network cable – to be provided by customer)

Stop Table

• Suction plates integrated into the stop table, automatically controlled via POS 3000
• Rotation unit integrated into the stop table

Fully Automatic Tool Changer

• Tool changer portal for upper tool changes with automatic tool changing system (WZS 6000) for maximum upper tool travel height of 400 mm (without tools)
• 2 tool changers moving toward each other, each with one gripping unit (total of 8 axes)
• incl. enclosed safety fence with side door
• incl. climate control units on both control cabinets

Upper Beam Tools WZS 6000

• Approx. 1000 N/mm² tensile strength, surface-hardened (gas nitrided) Gooseneck segment “C” for tool changer h = 400 mm, 30°, R 1.0, clearance 70 mm
• No. 1 – L = 2 × (30, 35, 40, 45, 50, 55, 60) = 630 mm
• No. 2 – L = 80 mm (only emergency change quantity)
• No. 3 – L = 2 × 160 = 320 mm (corner pieces) Maximum sheet thickness: 1.5 mm stainless steel

Tools for Upper Changeable Segments WZS 6000

• Approx. 1100 N/mm² tensile strength Per segment: 2 fold-out corner pieces, Per segment: 2 fold-out changeable pieces

Tools for the bending beam

Bending Beam Tools WZS 7000, approx. 1100 N/mm² tensile strength
Offset, segmented bending rail

• Width (b): 65/15 mm
• Height (h): 101/81 mm
• No. 1 – Length: 2 × (25, 30, 35, 40, 45, 50) = 450 mm
• No. 2 – Length: 14 × 200 mm
• No. 3 – Length: 1 × 150 mm
• Total length: 3250 mm
• Weight: 68.2 kg

Bending Beam Tools WZS 7000, approx. 1100 N/mm² tensile strength
Offset, segmented bending rail

• Width (b): 65/40 mm
• Height (h): 101/81 mm
• No. 1 – Length: 2 × (25, 30, 35, 40, 45, 50) = 450 mm
• No. 2 – Length: 14 × 200 mm
• No. 3 – Length: 1 × 150 mm
• Total length: 3250 mm

Lower Beam Tools WZS 1000, approx. 1100 N/mm² tensile strength
Lower beam rail “Up and Down” 30°, R 1.5

• Segmented, bolted at the ends
• With finger milling slots
• Width (b): 117 mm
• Height (h): 69 mm
• Length: 3240 mm
• Weight: 160 kg